Using Directional and Omni-Directional Antennas to Boost Wireless LAN Signals

Posts Tagged ‘wifi’

VoIP Over WiFi for Businesses: Sending Voice Over the Wireless LAN

Saturday, July 10th, 2010

The convergence of data and voice networks in the business environment takes on a new twist with the emergence of wireless networking. The freedom of mobility offered to users in a wireless LAN has proven to provide a noticeable boost in productivity, efficiency, and. employee morale. No longer is the work force tied to their desk when on the job. Workers can access company files and receive important communications from anywhere on the company campus that’s in range of a wireless access point.


With voice communications thrown into the mix, mobile users can stay in touch while roaming the property inside or out, and even on the road. The acceptance of the fixed to mobile convergence concept by the telecommunications industry only promises to fuel the fire for the adoption of VoIP over WiFi.


The Challenges of Implementing VoIP over WiFi Networks


As with any emerging technology, there are challenges to overcome. The development of the converged network, i.e. data and voice on the same IP based LAN, while yet to be an established norm, is proving to be beneficial for businesses from both a cost and productivity perspective. Adding the prospect of VoIP over a wireless network brings up a whole new set of issues.


VoIP is a time sensitive technology. Calls must be set up and authenticated, and voice packets must arrive at their destination without interruption and on time. This requires a near continuous network stream, uninterrupted by less sensitive data transmissions. The implementation of quality of service (QoS) techniques on wired LANs assure that these voice packets receive priority, and call quality issues such as latency, jitter, and packet loss have been sufficiently addressed.


Enter the standards based wireless network, a technology in an earlier stage of development, and more challenges occur. While today’s wired network provides plenty of bandwidth for both voice and data to coexist, WLANs provide less bandwidth, and quality of service issues must be revisited. Security measures such as authentication and encryption must be implemented and can add to the problem by increasing the size of the voice packet. Additionally, users on the move will traverse wireless access points where handoffs must be quick and smooth.


The IEEE 802 standards governing wireless technology are evolving rapidly and promise to deal with a broad spectrum of WiFi issues. Increasing the bandwidth available, prioritizing voice packets for QoS, authentication and encryption protocols for security, and enhanced roaming techniques are all being addressed.


Also in development is the wireless technology commonly known as WiMax, providing for the implementation of high bandwidth wireless communications covering distances of up to 30 miles. The evolution of WiMax could prove of great consequence to developing countries, as well as metropolitan LANs.


Security in a VoIP/WiFi Network


Companies wishing to implement wVoIP must take security issues into consideration from the start. As in any IP network, the dangers of hackers, denial of service, highjacking and spam, all lurk in the shadows.


Because a wireless network uses radio frequencies as its transmission media, the security normally provided by a firewall in a wired network is not sufficient, simply because of the physics. Whereas to break into a wired LAN requires hackers to either physically be inside the network or to hack in through the Internet, in a WLAN they can grab network transmissions from the air while parked across the street. The security issues that network managers must consider in a VoWLAN are the privacy of conversations, and the protection of the network infrastructure.


For WiFi networks, security has had a shaky start with the implementation of WEP as its security mechanism. WEP provides for authentication and encryption between the user and the access point, and was found to be easily hacked. The 802.11i standard, adopted as WPA2 (Wireless Protected Access), provides for more robust security by requiring two way authentication between the user and the network, and uses AES (Advanced Encryption Standard) as its encryption engine.


As network managers plan the rollout of a wireless VoIP network, the greatest security threat they face is improper implementation. Building security into the design of the initial deployment can, and should, affect the network topology, as well as material costs. Failure to do so could lead to further expenses in loss of services and network redesigns in the event of compromise.


WiFi, VoIP, and the Cellular Networks


Manufacturers of cellular devices are incorporating WiFi radios into their handsets at an ever increasing rate. New versions of mobile operating systems are coming out complete with a built in VoIP stack, inviting carriers and manufacturers to add VoIP functionality to their devices. Dual and quad band cell phones can choose between the strongest network available, cellular or WiFi, and place a call accordingly.


As cell phones become more like mobile offices, the benefits of a mobile work force become apparent. In the case of the road warrior, the ability to communicate via email, text messaging, video or voice, allows them to stay on the road longer without losing touch. In the age of instant information, mobile office applications allow files to be downloaded, edited, and uploaded, increasing the productivity of the traveler to the point where just about anything that can be done in the office can be done on the road.


A cell phone that can switch between cellular and WiFi networks can significantly reduce telecommunications costs at the corporate office. With WiFi hotspots popping up at hotels, cafes, and corporate LANs across the globe, mobile workers can stay in touch with office and family both on and off the job. With the addition of a VoIP service provider, cheaper VoIP calls can be made from any WiFi network at the push of a button.


Imagine, if you will, a future where one phone, with one phone number, can seamlessly traverse cellular networks, WiFi networks, cable and PSTN landlines. Where roaming and switching between disparate networks occur without interruption or loss of call quality. Fixed to Mobile Convergence is the buzzword of the decade, and the IP Multimedia Subsystem (IMS) architecture is the mechanism that promises to get us there.


The goal of IMS is to provide all the services and applications that the Internet provides, both current, and as of yet unimagined. IP based services such as VoIP, Push to talk cellular (POC), videoconferencing, text messaging, community services, presence information and file sharing, are just some of the possibilities. Designed to work with any fixed, mobile or wireless packet switched network, backwards compatibility for the legacy circuit switched phone system is provided through the use of gateways.


Although still in its infancy, IMS is already being implemented by AT&T as the platform in its newly acquired Cingular cellular network. Interest in investing in a new infrastructure by mobile and fixed operators has been up and down, as they weigh the costs and benefits of the new technology.


As the technology of VoIP over WiFi networks continues to develop, businesses of all sizes can reap the benefits of increased mobility, productivity, and significant cost savings. Standards committees are constantly working on ways to increase security and quality of service, and as fixed mobile convergence gains acceptance in the telecommunications industry, more choices in the services offered and the IP applications available to businesses are sure to follow. What will also be interesting to watch, is how these very bandwidth intensive applications will be priced by the carrier networks, and how it will affect the neutrality of the Internet.

Michael Talbert is a certified systems engineer and web designerwith over 7 years experience in the industry. For more information on Voice over IP Telephony, visit the website VoIP-Facts.net, or the VoIP Blog for up to date industry news and commentary.

 Mail this post

Technorati Tags: , , , , , ,

Wi-Fi Patch Antenna

Friday, April 23rd, 2010

IEEE standard 802.11 is commonly used for wireless networks. The wireless networks have many uses. It helps in the mobility and portability of he nodes. In other words the nodes are not tied to each other with wires. They are free to move within the network.

Among the various technologies of wireless networks, Wifi is one of the most promising and popular. The popularity of wifi network can be judged from the fact that many laptop manufacturers have manufactured such laptops which have inbuilt wifi. The wifi technology is now spreading to other devices also like mp3 players, toys, digital picture frame, portable phones and many other appliances, which have proved to be handy in our day-to-day life.

These days the wifi networks are established in most of the public places like libraries, coffee shops, offices, homes etc. The devices are now made with built-in wifi features.
But more equipments are now available which helps to enhance the present capability of wifi system.

 

The range of a wifi router or access device is around 300 ft is inside a room or 800 to 1000 feet outdoors. Any obstacle in the way of transmission can severely decrease the range of these devices. In order to increase and enhance the range of wifi devices, antennas are used.

Wifi patch antenna

A wifi patch antenna as the name suggests is very small and compact as compared to regular wifi antennas available. A wifi antenna adds about 8dBi to the access.

A wifi patch antenna is very light in weight and is surely eye-catching.

Since wifi patch antenna is portable, it can prove to be very useful to persons who travel moat of the time like businessmen. With the help of wifi patch antenna the access area can be increased and internet can be accessed even if the person is some distance away from access point. A wifi patch antenna can also prove very useful in homes where there are large number of obstacles. A normal antenna would not function as efficiently as a patch antenna.

With increase in popularity of internet, there is a huge demand for more areas to be wifi enabled. People now want to access internet from any place away from home, in office, in parks etc. The wifi patch antenna proves very useful in accessing the network far from any access points. This kind of antenna is becoming a necessity for people like businessmen. The wifi patch antenna is worth spending money on.

See Wi-fi" with this amazing camera

We do this basically by pointing a wifi antenna (or several antennas) and measuring the signal strength throughout a view – the faster we can do this, the faster we can create full-screen images. 

Why Oh Why, iPad Wi-Fi?

What we’re talking about here is Wi-Fi connectivity and speed. Because of the placement of the antenna in the Wi-Fi-only model iPad, users have been reporting less than stellar performance. 

PC To TV Converter – Direct TV to WIFI Satellite Dish

It was a DIY project where I turned a TV dish into a Wifi dish (it can no longer receive TV signals). I got the dish for free from a friend and spent about $100 on parts (router, water proof conjunction box, biquad antenna) …    

i want to use antenna as reciver to collect WIFI signal how can i

i have wireless router modem belkin i want to extend the signal to other building 100 meter away but its line of sight i tried to use linksys range expander but.    

Cheap and easy WIFI antenna signal booster that is

A new swing on an old idea for improving your WIFI signal!    

 Mail this post

Technorati Tags: , , , ,

Understanding the Difference Between Wi-Fi and WiMax

Wednesday, April 21st, 2010

When it comes to getting online, there have been a number of different developments and innovations in the past few years. After all, the internet was not what it is now for very long. In fact, when most people first got online, they were using a regular phone line and a dial-up modem. This meant that the only thing that you could possibly do online was read text, with anything else–from loading images to download mp3s–taking up significantly more time.

But it seemed that rather quickly, the internet was able to take steps forward. Switching to ethernet instead of regular phone lines to send and receive information was one way that suddenly everyone was rocketed forward. Because on a connection that allows for more information to pass back and forth, it was possible finally to actually get everything from images to larger files back and forth in enough time that it made more sense to send the both. And because information loaded quicker, this also changed the way that people designed websites. This meant that suddenly things such as online marketplaces and image-heavy websites were possible, and that the general public had access to them.

For a long time after the speed of the internet was revved up, changing the way that content worked and things were shared, there was somewhat of a plateau. After all, after video could be streamed, there wasn’t much room to step forward with the current technology. Because one of the most important things to keep in mind when thinking about any form of the internet, from dial-up to WiMax, is that it is only as good as the devices that currently exist. So the internet in terms of speed stayed about the same. However, one thing that did not change was the fact that it was impossible to get online if you weren’t sitting at a desktop computer.

Because there was no way of getting away from the desk, a lot of people saw technology as something that had a time and place, because it was not possible to break the internet out of that kind of setting. But with the introduction of wireless internet, this all changed. The first wireless networks were incredibly slow, almost at a lag compared to a broadband connection, but they did offer coverage for a medium-sized room. This meant that if your computer was Wi-Fi enabled, you no longer needed to plug into any sort of cord. Because a router was able to provide a signal by being plugged into a conventional cable modem, you were still only as fast as the network providing your signal. And while in future years, this did get a little bit faster, the fact still remained that the furthest you could get away from a router that provided signal was a matter of feet.

Enter the advancement of WiMax, which actually provided a feasible form of evolution in getting online. Because it depended on towers instead of routers, this new form of wireless immediately set itself apart. But that’s not the only reason that it is truly unique as well as being a step forward. Because this sort of wireless has towers that can bounce the signal from tower to tower, the coverage area for this form of wireless goes far beyond a few feet. In fact, you’re talking networks that function far more like those of mobile phone providers who offer data coverage from coast to coast. You definitely are able to take advantage of this if you’re on the road, because while other people will be trying to find the closest Wi-Fi hot spot, you can simply flip open your laptop anywhere and connect to the same network that you are used to getting online with back home.

So to understand the difference between these two forms of wireless, you only need to look at how far you can travel, and how strong the signal can be. Beyond that, there is also the 4G factor to take into consideration. Even though there have been developments and steps forward with routers, the fact is that the quickest network around belongs to the new form of wireless alone, as well as to a select few mobile phone companies. But since you don’t want to complete important business through a small hand-held device, it makes more sense to adopt a form of the internet that can actually manage to go where you go on a computer, rather than a cell phone.

 Mail this post

Technorati Tags: , ,

Boosting Wireless Lan Signals.

Thursday, April 2nd, 2009

Have you ever wondered how people can boost the range and signal strength of their WiFi connections?  Most of the time, they use hardware that is capable of boosting radio signals, typically a form of antenna.  The typical wireless access point is capable of broadcasting a signal up to 300 feet away in all directions.  However, they are omni-directional, which means that the signal is the same in all directions, therefore weakening the overall signal strength.  Adding a directional antenna, which focuses the signal at a particular area, can help increase the signal strength and distance. 

Boosting wireless LAN signals is a fairly easy task, but only if you know what to buy. The main problem with wireless local area networks is that they have "dead spots," areas that are outside the reach of the wireless network.  This is common with large office buildings.  To rectify this problem, companies have made devices known as extenders which can boost the signal strength and distance.  They work by adding antennas to the original access point device, which are capable of transmitting a stronger signal. 

The larger the antenna, the more gain it has, which means that it can transmit a much stronger signal. There are two types of antennas that can be added to a wireless access point: directional and omni-directional.  An omni-directional antenna transmits in all directions, boosting wireless LAN signals equally in all areas within its sphere.  Directional antennas, on the other hand, transmit the WiFi signal in only a single direction; however, said signal is much more powerful and can reach a larger distance than an omni-directional antenna.

How does one know whether to buy a directional or omni-directional antenna?  This depends on whether a person needs a signal boost in a particular area or over an entire sector of a building.  The typical office building can benefit more from an omni-directional extender if the access point is located in the middle.  If the access point is at the side of a building, however, a directional extender would be more helpful, because the signal would spread out in the direction the antenna is pointed at.

Anybody can find a good extender for boosting wireless LAN signals at an electronics store or online.  The thing to remember is the difference between a directional and an omni-directional extender.  Directional antennas focus the signal in one direction, but has a stronger signal over a longer distance.  Omni-directional antennas boost the signal strength over all directions equally, but has a shorter range than directional antennas.


Ultimate Wireless wlan Signal Booster Antena

Ultimate Wireless wlan Signal Booster Antena. antennas are good if you need internet access, may give you some anonimity, and possibility to make air operations (dumping air traffic (on your ne…   Read more…

Wi Fi Signal Booster – How WLAN Antennas Work

Simply put, antenna theory is boring. If I were to go into great technical detail about how antennas work, your eyes would glaze over and you’d eventu.    

DealExtreme: $43.20 2.4GHz 30dBm 802.11n/b/g SMA Signal Booster

DealExtreme.co Price: $43.20 – Free Shipping – 2.4GHz 30dBm 802.11n/b/g SMA Signal Booster / Range Extender for Wifi/WLAN Wireless AP and Routers (Networking Computers) with free worldwi…    

Info about improving Wirelles connectivity 

You can also install a Wi-Fi repeater (often called a "range extender" or "signal booster.") Finally, in extreme cases, you may need to configure a second base station to extend the range of y…    

My DIY Simple WiFi Antenna Booster 

9 Responses to “My DIY Simple WiFi Antenna Booster – Very Stable and Stays On The Signal”.

 Mail this post

Technorati Tags: , , , , , , , , , , , , ,

© 2009. All Rights Reserved
SEO Powered by Platinum SEO from Techblissonline